LC To LC Uniboot Duplex Patch Cord

A Shared Cable Entry behind the LC Pair

Aqua duplex cord with a shared cable entry and extended white pull tabs.

LC to LC Uniboot Duplex Patch Cord Two fibers travel inside a common round cable and enter a shared rear housing. The LC ferrules remain a duplex pair at the adapter, while the long white tabs bring the handling point forward from the connector bodies. The illustrated cord combines aqua front pieces with white bodies and tabs. Use this mechanical style when planning crowded connector rows where direct finger access to a short latch is limited. Request This Mechanical Style   View Variant Details

What Changes at the Cable Exit

For twenty-four duplex terminations at a panel edge, this becomes forty-eight individual boots versus twenty-four shared boots. The number of optical fibers stays at forty-eight. These are component counts; actual bundle dimensions also depend on jacket size, spacing and bend management.

Leave a Straight Approach to the Long Tab

Check the tab's reach beyond neighboring plugs, label holders and the front of the panel. A tab can move the grip point into a more accessible position, but it still needs a clear path along the connector's release direction. A nearby door or transverse cable bundle may occupy that path.

Seat and release the approval sample in a representative port row. Observe how the tab engages the latch, where the common boot begins to bend and whether adjacent connectors remain reachable. Demonstrate any proposed polarity-change or tab-removal function on that exact sample before including it in the specification.

Discuss the populated front face with our panel team or include its dimensions in a rack cabling review.

Construction and Ordering Specifications

Quotation reference only: the 2.0 mm construction and optical target below describe a comparable uniboot configuration. The picture cannot establish the fiber category, polish or material rating; confirm these for the ordered version.

Include return-loss limits, operating temperature and minimum bend radius in the approved specification for the finished assembly.

Send a Port-Row View with the Enquiry

A front and side view of the intended connector row helps establish the tab length and exit clearance. Add the required fiber category, jacket, finished length and quantity. Where an existing cord must be matched, identify its body and tab version as well as its optical description.

Ask Glory to review the fit · Submit the uniboot requirement

For other termination styles, see the patch-cord collection and the connection-component range.

Work with Glory Optical on the Mechanical Variant

Glory Optical, Ningbo

Use a Physical Sample to Resolve the Connector Geometry The body, tab and boot together determine the mechanical variant. Our team can review that sample alongside the requested optical build. Manufacturing enquiries are handled through our Ningbo operation, established in 2008. About our business · Custom development contacts

A Glimpse of Our Enclosure Evaluations

Video subjects are boxes and closures; request assembly-specific optical records for this cord.

Spray rig footage Watch clip

Sealed-closure footage Watch clip

Water-test footage Watch clip