201/304 Stainless Steel Optical Cable Clamp
Glory Optical's stainless steel optical cable clamp positions fiber optic cable runs on supporting brackets and installation frames. The product family offers 201 or 304 stainless steel hardware, single-hole or dual-hole clamping blocks, and cable-contact dimensions configured around the selected cable diameter. A threaded support bracket connects the assembly to the mounting edge, while the plastic clamping section organizes the cables at that fixing point for outdoor, industrial and building cable routes.
Product line: Optical Cable Fixing & Installation Hardware
Single / Dual-Hole Options201 / 304 stainless steel Plastic clamping section · Project-sized cable contact |
Product Views and Configuration Details
Clamping Block Front ViewFront view of the clamping blocks and support bracket. |
Opposite-Side ViewAnother view of the two-block assembly and its threaded hardware. |
Support Bracket DetailCaliper photograph of the support bracket and clamping section. |
Assembly Measurement ViewTwo-block assembly shown alongside a caliper. |
Three-Block ArrangementThree stacked clamping blocks shown in the source photograph. |
Three-Block Reference DrawingSS304, EPDM contact material and opening dimensions shown for this illustrated arrangement. |
Clamping Structure and Material Options
201 or 304 Stainless Steel Hardware
Two stainless steel choices let the hardware follow the project material schedule. Specify 201 or 304 on the item description so the selected grade remains identifiable through sourcing, assembly and delivery.
Single-Hole and Dual-Hole Block Options
The clamping block can use a single-hole or dual-hole design. Selecting the opening layout separately from the stack arrangement gives the cable route a defined contact geometry at each support location.
Plastic Contact Section Sized to the Cable
The plastic clamping section is configured around the cable diameter. Matching that contact geometry to the cable jacket provides a defined fixing position and keeps the selected cable size traceable in the hardware schedule.
Threaded Support Bracket
The support bracket uses a screw connection at the mounting edge, with separate threaded hardware through the cable-clamping blocks. Planning access to both fasteners helps installers position the support connection and cable-contact section in the intended orientation.
Deburred Metal Edges
Deburring removes sharp edges from the metal components. The finish helps reduce snagging at the support hardware when installers position the assembly, handle cable jackets and arrange adjacent cable runs.
UV-Resistant Construction for Exposed Routes
The construction includes UV resistance for installations exposed to daylight. This characteristic supports the clamp's outdoor cable-fixing role, while the support layout and selected block geometry define how each cable sits along the route.
Single-Hole and Dual-Hole Configurations
| Clamping block | Metal options | Order selection |
|---|---|---|
| Single-hole block | 201 or 304 stainless steel | Cable OD, contact geometry and stack arrangement |
| Dual-hole block | 201 or 304 stainless steel | Opening layout, cable ODs and stack arrangement |
Optical Cable Clamp Technical Specifications
| Item | Specification |
|---|---|
| Product type | Optical cable fixing clamp |
| Product line | Optical Cable Fixing & Installation Hardware |
| Metal material options | 201 stainless steel or 304 stainless steel |
| Clamping section | Plastic clamping blocks |
| Block design options | Single-hole or dual-hole |
| Cable-contact sizing | Configured around the selected cable outside diameter |
| Support attachment | Threaded clamp bracket |
| Metal edge finish | Deburred |
| Outdoor characteristic | UV-resistant construction |
Illustrated Three-Block Configuration
| Drawing item | Illustrated value |
|---|---|
| Illustrated arrangement | Three stacked clamping blocks |
| Metal grade shown | 304 stainless steel |
| Cable-contact material shown | EPDM |
| Clamping block material shown | Plastic |
| Cable-opening ranges shown | Ø4–7 mm and Ø9–14 mm |
| Bracket strip section | 3 × 25 mm |
| Bracket opening dimension | 30 mm |
| Mounting-screw reference dimension | 48 mm |
| Lower clamping-assembly reference dimension | 117 mm |
| Thread marking | M8.0 |
Packing Example
| Packing item | Example configuration |
|---|---|
| Single-unit weight | 160 g |
| Quantity per carton | 45 sets |
| Outer carton size | 20 × 20 × 30 cm |
Optical Cable Clamp Applications
Optical Cable Fixing on Outdoor Support Frames
An outdoor support frame can carry more than one cable route, with different cable diameters reaching the same mounting area. Using an opening that does not match the jacket makes the fixing arrangement harder to repeat along the frame. This clamp combines a threaded support connection with plastic cable-contact blocks configured for the selected diameter. The assembly sits at the local support point along the optical cable route. List the cable OD, single-hole or dual-hole block design, stainless steel grade and stack arrangement together when preparing the installation hardware schedule.
Cable Organization at Building and Equipment Areas
At a building riser or equipment support, parallel cable runs often share a limited amount of mounting space. A defined clamping layout makes the route easier to identify than an arrangement assembled from unrelated contact parts. The plastic blocks position the cables at the fixing point, while the threaded bracket connects that section to the support. Select the opening geometry around the cables used at the installation node. Include access to the bracket screw, block fasteners and cable continuation in the layout, with the chosen material grade recorded on the order.
Project Hardware for Mixed Cable Diameters
A project using several cable sizes needs a clear way to distinguish the fixing hardware delivered to each work area. Ordering only by a general clamp name leaves the contact geometry and mounting arrangement open to interpretation. The single-hole and dual-hole options allow the block design to follow the cable schedule, with stainless steel grade selected as a separate item. Use these assemblies at the supporting brackets along the planned cable routes. Group the order by cable OD, block layout, stack arrangement and support interface, then carry those identifiers onto the project labels.
Ordering Configuration
| Order item | Project information |
|---|---|
| Cable details | Outside diameter, jacket profile and number of cable runs at each fixing point |
| Contact-block design | Single-hole or dual-hole layout; opening dimensions |
| Block arrangement | Number and position of clamping blocks in the selected assembly |
| Metal grade | 201 or 304 stainless steel |
| Support interface | Mounting-edge geometry, bracket opening and fastener access |
| Project identification | Item references, labels and packaging arrangement |
Cable Installation Hardware · Outdoor Fiber Optic Cables
About Glory Optical
|
Glory Optical facility, Ningbo |
Glory OpticalFounded in 2008 · Ningbo, China · OEM/ODM support Ningbo Glory Optical Communication Co., Ltd. manufactures passive fiber optic products and supplies telecom operators, ISPs, contractors, distributors and OEM/ODM buyers. Our portfolio covers fiber boxes, splice closures, PLC splitters, fiber optic cables, patch cords, pigtails, adapters, MTP/MPO assemblies and installation accessories for fiber network projects. Manufacturing & OEM/ODM SupportManufacturing capabilities across our product families include mold development, enclosure molding, component assembly and fiber cable assembly. OEM/ODM projects can cover drawings, product configuration, samples, branding, labels and packaging, according to the selected product and confirmed requirements. |
Testing Capabilities
Glory Optical supports inspection and testing according to confirmed product specifications and order requirements. The following videos show examples from our testing activities.
Water Spray Testing |
Sealing Performance Testing |
Water Resistance Testing |
Project Supply & OEM Support
Send Glory Optical the cable sizes, clamping-block layout, stainless steel grade and mounting interface for your project. Our team can discuss the selected assembly, sample requirements, item labels and packing arrangement.
Discuss Your Product or Project Requirement
Send the product model, quantity, application and required configuration for quotation or sample discussion. Include any drawing, labeling, packaging and documentation requirements so our team can review the order details.
Email: sales@gloryoptic.com
Hot Tags: 201/304 stainless steel optical cable clamp, China 201/304 stainless steel optical cable clamp manufacturers, suppliers, factory, fiber optic cable termination kit, fiber optic cable tool kit, fiber optic connector tool kits, fiber optic termination kit, fiber optic termination tool kit, fo cable splicing kit