8-Shaped Cable Tension Clamp
Glory Optical's 8-shaped cable tension clamp provides a mechanical anchor for aerial figure-8 cable routes. Two configurations are available: 3–7 mm cable grip with an 8 kN breaking load, and 3–10 mm cable grip with a 10 kN breaking load. Both use a PA6, SS201 stainless steel and aluminum construction, combining a cable-gripping body with a wire-loop attachment for the supporting hardware.
Product line: Aerial Cable Anchoring & Dead-End Hardware
|
|
Figure-8 Cable Anchor3–7 mm cable grip · 8 kN breaking load 3–10 mm cable grip · 10 kN breaking load |
Cable Grip and Mounting Features
Grip for Figure-8 Cable Routes
The clamp is designed around 8-shaped cable configurations, with an anti-slip gripping arrangement that holds the cable at the anchoring point. Specify the cable construction and the diameter of the section being gripped when choosing the configuration.
Two Breaking-Load Specifications
The 3–7 mm cable-grip configuration has a stated breaking load of 8 kN. The 3–10 mm configuration has a stated breaking load of 10 kN. Keep the cable range and its load figure together in the project schedule. Breaking load is a failure-load value; the project working tension is specified separately.
PA6, SS201 and Aluminum Construction
The construction combines PA6 polymer, SS201 stainless steel and aluminum components. The aluminum body contains the cable-gripping section, while the steel-wire loop provides the connection to the supporting hardware.
Tool-Free Clamp Installation
The clamp is designed for tool-free assembly around a compatible cable. Its wire-loop connection gives installers a visible attachment point for the selected bracket or anchor hardware. Review the loop-to-bracket fit and cable exit direction as part of the installation arrangement.
Outdoor Service Design
The range is specified with a 10-year design service life and materials intended to resist corrosion, UV exposure and mechanical wear. Confirm the installation environment, required documentation and inspection requirements for the selected configuration.
Cable-Grip and Breaking-Load Options
|
Cable-grip diameter |
Breaking load |
|---|---|
|
3–7 mm |
8 kN |
|
3–10 mm |
10 kN |
The cable ranges overlap at 3–7 mm. Select against both the cable geometry and the project load requirement, and record the cable-grip range and breaking load in the purchase order.
8-Shaped Cable Tension Clamp Technical Specifications
|
Item |
Specification |
|---|---|
|
Product name |
8-shaped cable support tension clamp |
|
Cable configuration |
Figure-8 / 8-shaped cable |
|
Cable-grip diameter |
3–7 mm / 3–10 mm |
|
Breaking load by cable-grip range |
3–7 mm: 8 kN; 3–10 mm: 10 kN |
|
Materials |
PA6 + SS201 stainless steel + aluminum |
|
Overall length |
340 mm |
|
Drawing dimensions for the 3–7 mm configuration |
66 mm overall body height; 64 mm body length; 3.0 mm wire diameter |
|
Design service life |
10 years |
|
Installation feature |
Tool-free clamp installation with wire-loop attachment |
|
Applications |
Telecommunications, aerial fiber optic routes, power distribution and industrial cable support |
Aerial Cable Anchoring Applications
Figure-8 Fiber Optic Cable Terminations
At the end of an aerial figure-8 fiber route, the clamp anchors the compatible cable section to the support hardware. Available cable-grip ranges are 3–7 mm and 3–10 mm. Include the cable profile and the diameter of the gripping section in the route schedule so the installation crew can identify the intended clamp.
Telecommunications and Power-Distribution Routes
The two cable-grip configurations support cable anchoring in telecommunications and power-distribution installations. The clamp body and wire loop form the connection between the cable and the supporting bracket. Specify the cable construction, design tension and bracket geometry together, then choose the configuration with the required cable fit and breaking-load specification.
Industrial Cable Support
Industrial overhead cable routes need an identifiable mechanical connection at each anchoring position. The figure-8 clamp provides a compact body-and-loop assembly for compatible cable profiles. List the installation environment, anchor position, cable diameter and breaking load in the bill of materials, together with any project labeling or packaging requirements.
Selection and Project Ordering
|
Order item |
Information for the project |
|---|---|
|
Cable information |
Figure-8 cable construction, gripping-section diameter and jacket details |
|
Cable grip and breaking load |
3–7 mm / 8 kN; 3–10 mm / 10 kN breaking load |
|
Route and support |
Anchor position, project working tension and supporting hardware |
|
Mounting interface |
Wire-loop-to-bracket fit and cable exit direction |
|
Project identification |
Required labels and packaging identification |
|
Delivery configuration |
Quantity, sample requirements, packing arrangement and required documentation |
Request a Cable Clamp Quotation
Browse Fiber Cable Installation Hardware · Explore Outdoor Fiber Optic Cables
About Glory Optical
|
Glory Optical facility, Ningbo |
Glory OpticalFounded in 2008 · Ningbo, China · OEM/ODM support Ningbo Glory Optical Communication Co., Ltd. manufactures passive fiber optic products and supplies telecom operators, ISPs, contractors, distributors and OEM/ODM buyers. Our portfolio covers fiber boxes, splice closures, PLC splitters, fiber optic cables, patch cords, pigtails, adapters, MTP/MPO assemblies and installation accessories for fiber network projects. Manufacturing & OEM/ODM SupportManufacturing capabilities across our product families include mold development, enclosure molding, component assembly and fiber cable assembly. OEM/ODM projects can cover drawings, product configuration, samples, branding, labels and packaging, according to the selected product and confirmed requirements. |
Testing Capabilities
Glory Optical supports inspection and testing according to confirmed product specifications and order requirements. The following videos show examples from our testing activities.
Water Spray Testing |
Sealing Performance Testing |
Water Resistance Testing |
Project Supply & OEM Support
For 8-shaped cable tension clamp orders, send the figure-8 cable profile, gripping-section diameter, required breaking load, bracket interface and quantity. Glory Optical can discuss samples, project labels and packaging around the selected configuration.
Discuss Your Product or Project Requirement
Send the product specifications, quantity, application and required configuration for quotation or sample discussion. Include any drawing, labeling, packaging and documentation requirements so our team can review the order details.
Email: sales@gloryoptic.com
Hot Tags: 8-shaped cable tension clamp, China 8-shaped cable tension clamp manufacturers, suppliers, factory, fiber cable termination kit, fiber optic ftth tool kit, fiber optic termination kit, fiber splicing tool, fo cable splicing kit, tool kit fiber optic