PA6 Aerial Drop Cable Anchor Clamp
Glory Optical's XS-B06 aerial drop cable anchor clamp secures 3–9 mm ADSS and fiber drop cables at dead-end points in FTTH access routes. The assembly combines a reinforced PA6 nylon body with SS201 stainless steel wire, a 5.5 kN breaking-load specification and an open-hook, self-locking attachment design. The 330 × 62 × 32 mm assembly weighs 133 g and can be supplied individually or with a drop-wire bracket.
Product line: Aerial Fiber Cable Anchoring & Drop Hardware
Anchor ClampØ3–9 mm cables 5.5 kN breaking load |
PA6 Body and Attachment Details
Reinforced PA6 BodyClose-up of the ribbed body and the cable-gripping section. |
Wire-to-Body ConnectionThe steel-wire legs and two visible fastening points at the top of the body. |
Attachment Loop DetailClose-up of the upper attachment and the two wire legs. |
Cable Anchoring Features
3–9 mm Cable Compatibility
The cable range covers outside diameters from 3 mm to 9 mm. This gives the hardware schedule a defined size band for ADSS and drop-cable anchoring, with the cable construction included alongside its diameter.
Reinforced PA6 Nylon Body
Reinforced PA6 forms the cable-gripping body. Its ribbed exterior and compact gripping section keep the contact assembly together at the anchor point, with the body and wire attachment forming one supplied clamp.
SS201 Stainless Steel Wire
The wire attachment uses SS201 stainless steel. The two wire legs connect the gripping body to the upper attachment, establishing the mechanical path between the cable-holding section and the support hardware.
Open-Hook Self-Locking Attachment
The open-hook, self-locking design connects the clamp to pole-side cable hardware. Plan the bracket interface and cable approach together so the attachment position follows the route at the dead-end point.
−40°C to +60°C Temperature Range
The temperature range extends from −40°C to +60°C. Recording this value alongside the installation environment and cable specification helps keep the selected anchoring hardware consistent with the project's site conditions.
Clamp or Bracket-Set Supply
The clamp can be ordered individually or with a drop-wire cable bracket. Listing the supply format on the order separates the anchor itself from the complete mounting package delivered to an installation team.
XS-B06 Technical Specifications
| Item | Specification |
|---|---|
| Model | XS-B06 |
| Product type | Aerial ADSS / drop cable anchor clamp |
| Product line | Aerial Fiber Cable Anchoring & Drop Hardware |
| Cable outside diameter | 3–9 mm |
| Body material | Reinforced PA6 nylon |
| Wire material | SS201 stainless steel |
| Breaking load | 5.5 kN |
| Size | 330 × 62 × 32 mm |
| Single-unit weight | 133 g |
| Temperature range | −40°C to +60°C |
| Attachment design | Open-hook, self-locking |
| Network role | Dead-end anchoring in aerial FTTH access routes |
| Supply format | Individual clamp or assembly with a drop-wire bracket |
Packing Configuration
| Packing item | Configuration |
|---|---|
| Quantity per carton | 80 pieces |
| Outer carton size | 40 × 30 × 30 cm |
FTTH and ADSS Drop Cable Anchoring Applications
Aerial FTTH Pole Dead Ends
Where a drop-cable run terminates at a pole, the mechanical anchor gives the cable a defined connection to the support. The XS-B06 combines its PA6 gripping body and SS201 wire attachment at that point, with a 3–9 mm cable-diameter range for the selected drop or ADSS cable. Choose the pole-side bracket to suit the attachment interface and planned cable direction. Include the cable outside diameter, route design tension and cable anchoring requirements in the hardware schedule, together with the choice of an individual clamp or a bracket assembly.
Customer-Side Drop Arrivals
At the customer side of an aerial drop, the cable needs an anchor before it continues toward the entry route or connection equipment. The XS-B06 positions the cable-gripping section at the selected support hardware, keeping the attachment point separate from the optical connection location. Its 330 × 62 × 32 mm size gives the layout a defined assembly envelope. Pair the clamp with a suitable drop-wire bracket, then record the cable OD, approach direction and available mounting space so the arrival route and anchoring hardware can be supplied together.
ADSS Approaches to Distribution Poles
A distribution pole may bring a small ADSS cable toward a closure or terminal while other cable runs continue along the route. The anchor and optical connection perform separate tasks at that node. The XS-B06 holds the selected 3–9 mm cable at the dead-end attachment, and the continuation is routed toward the connection equipment according to the cable layout. Record the cable construction, support interface and required anchoring arrangement on the site drawing. For procurement, distinguish the clamp quantity from the bracket quantity and carry both references into the packing list.
Project Selection and Ordering
| Order item | Project information |
|---|---|
| Cable specification | Cable construction and outside diameter within 3–9 mm |
| Anchor design | Route design tension and the cable manufacturer's anchoring requirements |
| Bracket interface | Support location, attachment geometry and cable approach direction |
| Supply format | Individual clamp or assembly with a drop-wire bracket |
| Quantity and packing | Clamp quantity, bracket quantity and carton arrangement |
| Project identification | Item references, labels and documentation requirements |
Aerial Cable Installation Hardware · Outdoor Fiber Optic Cables
About Glory Optical
|
Glory Optical facility, Ningbo |
Glory OpticalFounded in 2008 · Ningbo, China · OEM/ODM support Ningbo Glory Optical Communication Co., Ltd. manufactures passive fiber optic products and supplies telecom operators, ISPs, contractors, distributors and OEM/ODM buyers. Our portfolio covers fiber boxes, splice closures, PLC splitters, fiber optic cables, patch cords, pigtails, adapters, MTP/MPO assemblies and installation accessories for fiber network projects. Manufacturing & OEM/ODM SupportManufacturing capabilities across our product families include mold development, enclosure molding, component assembly and fiber cable assembly. OEM/ODM projects can cover drawings, product configuration, samples, branding, labels and packaging, according to the selected product and confirmed requirements. |
Testing Capabilities
Glory Optical supports inspection and testing according to confirmed product specifications and order requirements. The following videos show examples from our testing activities.
Water Spray Testing |
Sealing Performance Testing |
Water Resistance Testing |
Project Supply & OEM Support
For XS-B06 orders, provide the cable outside diameter, anchor location, bracket interface and quantity. Glory Optical can discuss the clamp or bracket-set configuration, samples, project labels and packing details.
Discuss Your Product or Project Requirement
Send the product model, quantity, application and required configuration for quotation or sample discussion. Include any drawing, labeling, packaging and documentation requirements so our team can review the order details.
Email: sales@gloryoptic.com
Hot Tags: pa6 aerial drop cable anchor clamp, China pa6 aerial drop cable anchor clamp manufacturers, suppliers, factory, fiber optic cable test equipment, fiber optic connector tool kits, fiber optic termination tool kit, fiber optic tool kit, fiber splicing tool, optical fiber tool kit
