Stainless Steel FTTH Drop Cable Tension Clamp
The stainless steel drop cable tension clamp anchors outdoor FTTH drops at a pole or building entry. A formed channel, perforated shim and sliding insert grip the cable, while a wire loop engages the mounting hook. Choose a clamp configuration for Ø2–8 mm round cable or a 2 × 3 mm flat drop, and specify 201 or 304 stainless steel for the project.
Product line: FTTH Drop Cable Anchoring Hardware
Outdoor Drop Cable AnchorRound Ø2–8 mm · Flat 2 × 3 mm 201 or 304 stainless steel |
Grip Components and Assembled Profiles
Channel, Shim and InsertSeparate components show where the cable contact shim and sliding insert sit inside the channel. |
Assembled Clamp ProfilesOpposite faces of the clamp show the formed channel and wire-loop connection. |
Choose the Grip and Steel Grade
Three parts form the grip
The channel houses the cable and contact shim. The sliding insert seats into the channel, and its wire loop forms the attachment point.
Match the cable cross-section
Round cable is specified by outside diameter. For flat drops, check both jacket dimensions and match the 2 × 3 mm profile to the correct clamp configuration.
Select the steel grade for the site
201 and 304 are available. Specify 304 where the project calls for greater corrosion resistance, and confirm the mating hook material at the same time.
Lay out the hook and cable path
Allow space to engage the wire loop and seat the insert. Keep the cable entry aligned with the channel so the first bend starts clear of the grip.
Cable Fit and Specifications
| Parameter | Specification |
|---|---|
| Application | Outdoor FTTH drop cable anchoring |
| Round cable configuration | Ø2–8 mm outside diameter |
| Flat cable configuration | 2 × 3 mm jacket cross-section |
| Material options | 201 or 304 stainless steel |
| Published ultimate tensile strength | 2,000 N |
| Assembly | Formed channel, perforated shim and sliding insert with wire loop |
| Attachment | Wire loop for a compatible hook or anchor |
| Carton quantity | 300 pieces |
| Outer carton | 38 × 23 × 17 cm |
Plan the Drop Cable Route
Pole-to-building FTTH drop
Use the loop at the pole-side hook to anchor the service drop. Check the required working tension against the cable and mounting hardware data before releasing the span layout.
Facade anchor before the entry bend
Place the clamp at a suitable wall anchor and leave enough straight cable between the grip and the bend toward the entry. Confirm the cable manufacturer's minimum bend radius.
Repeat orders for mixed cable routes
Identify each route as round or flat on the hardware list. Record the jacket dimensions and steel grade alongside the clamp count so crews can match the parts to the route.
Ordering Details
| Check | Details to provide |
|---|---|
| Cable profile | Round outside diameter or flat jacket width × height |
| Steel grade | 201 or 304, as specified by the project |
| Attachment | Hook dimensions and available installation clearance |
| Quantity | Total pieces by cable profile and steel grade |
About Glory Optical
|
Glory Optical facility, Ningbo |
Glory OpticalFounded in 2008 · Ningbo, China · OEM/ODM support Glory Optical has served fiber network projects from Ningbo since 2008. Its passive product range includes drop cables, cable assemblies, splitters, termination boxes, closures and installation hardware. Manufacturing & OEM/ODM SupportCapabilities across the range include tooling, molding and component and cable assembly. OEM and ODM orders can incorporate agreed part drawings, samples, product identification and packing details. |
Testing Capabilities
These three videos illustrate how Glory Optical carries out product checks across its range.
Water Spray Testing |
Sealing Performance Testing |
Water Resistance Testing |
Project Supply & OEM Support
When ordering drop clamps with cable, share the drop cable drawing or jacket measurements. Glory Optical can review the requested profile, grade, hook fit and pack quantities together.
Discuss Your Product or Project Requirement
Send the jacket dimensions, steel grade and quantity for a quotation. Include the hook drawing or a sample where fit needs to be checked.
Email: sales@gloryoptic.com
Hot Tags: stainless steel ftth drop cable tension clamp, China stainless steel ftth drop cable tension clamp manufacturers, suppliers, factory, fiber cable termination kit, fiber optic cable tool kit, fiber optic ftth tool kit, fiber optic termination tool kit, fiber optic tool kit, fiber tool