PA66 Flat Drop Cable Anchor Clamp

Send Inquiry
PA66 Flat Drop Cable Anchor Clamp
Details
Two flat jacket sizes are listed for this FTTH anchor clamp, 2 × 3 mm and 2 × 5 mm. The PA66 housing holds the grip insert, and a tether keeps the insert with the body when the clamp is open. A stainless steel hook connects the clamp to a suitable fixing point on a pole or building exterior. Select the version by the two dimensions of the cable jacket.
Category
Fiber Tool
Share to
Description

PA66 Flat Drop Cable Anchor Clamp

Two flat jacket sizes are listed for this FTTH anchor clamp, 2 × 3 mm and 2 × 5 mm. The PA66 housing holds the grip insert, and a tether keeps the insert with the body when the clamp is open. A stainless steel hook connects the clamp to a suitable fixing point on a pole or building exterior. Select the version by the two dimensions of the cable jacket.

Product line: Flat FTTH Drop Cable Hardware

Complete Flat Drop Clamp of the PA66 flat drop cable clamp

Flat Jacket Anchor Clamp

2 × 3 mm and 2 × 5 mm flat jacket options

PA66 housing · Ø2.5 mm stainless steel hook

Compare Cable Sizes   Ordering Details

Open Grip and Hook Views

Check the Jacket and Hook Fit

Measure both sides of the jacket

The two cable formats share a nominal 2 mm dimension. Measure the other side at the intended grip position to distinguish the 3 mm and 5 mm versions.

Keep the grip insert with the housing

The insert remains attached to the housing by a short tether. The open view shows the two molded pieces before they are seated together by hand.

Check the fixing point against the hook

The stainless steel hook uses Ø2.5 mm wire. Check the mating opening and space around it so the shaped ends can engage with the fixing hardware.

Confirm the tensile requirement for the route

The published reference is 1,062 N. Specify the cable profile and the required working tension when requesting confirmation for the selected configuration.

Flat Cable Selection and Specifications

Parameter Specification
Flat jacket sizes 2 × 3 mm or 2 × 5 mm
Clamp body PA66 nylon
Attachment hook Stainless steel, Ø2.5 mm wire
Grip construction Molded housing and tethered insert
Published tensile reference 1,062 N, confirm for the selected cable profile
Installation points Suitable pole or building exterior fittings
Packing reference 50 pieces per bag, 500 pieces per carton
Outer carton 40 × 30 × 26 cm

Use at the Subscriber Drop

Aerial subscriber lead

At the end of a flat drop run, match the clamp to the jacket size and the hook to the pole hardware. Use the cable and fitting specifications to check the load at the fixing point.

Exterior transition to an entry point

Place the fixing point where the cable can leave the grip in line with its jacket. Keep the transition toward the building entry within the cable supplier's bend-radius limits.

Route kits for two jacket widths

List the 2 × 3 mm and 2 × 5 mm clamps separately when preparing work packs. Label the bags by jacket size so the installer can identify the correct version at the subscriber location.

Ordering Details

Check Details to provide
Jacket dimensions Measured width and thickness, plus a cable drawing or sample if available
Fixing point Photo or drawing of the fitting that receives the hook
Load requirement Required working tension at the anchor
Quantity by size Separate counts for 2 × 3 mm and 2 × 5 mm

Request a Fit Check

FTTH Drop Cables

About Glory Optical

Glory Optical manufacturing facility in Ningbo, China

Glory Optical facility, Ningbo

Glory Optical

Founded in 2008 · Ningbo, China · OEM/ODM support

Since 2008, Glory Optical has supplied fiber network components from Ningbo. The range covers installation hardware, fiber cable assemblies, splitters, splice closures and termination boxes.

Manufacturing & OEM/ODM Support

Project orders can bring together tooling, molded components and assembled cable products. Glory Optical can use approved samples or drawings to coordinate identification and packing for the requested parts.

Testing Capabilities

The videos below show examples of inspection and testing at Glory Optical.

Water Spray Testing

Watch on YouTube

Sealing Performance Testing

Watch on YouTube

Water Resistance Testing

Watch on YouTube

Project Supply & OEM Support

For mixed flat drop routes, provide a quantity list by jacket size and the mating hardware for each route. The team can review sample needs and how the two sizes should be identified in the shipment.

About Glory Optical | OEM/ODM Services

Discuss Your Product or Project Requirement

For a quote, include the jacket dimensions, hook fitting and the quantity for each size.

Request a Quote | Email Sales

Email: sales@gloryoptic.com

Hot Tags: pa66 flat drop cable anchor clamp, China pa66 flat drop cable anchor clamp manufacturers, suppliers, factory, fiber optic cable tool kit, fiber optic connector tool kits, fiber optic termination kit, fiber optic tool bag, fiber tool box, tool kit fiber optic

Send Inquiry