FTTH Butterfly Cable Tension Clamp

Send Inquiry
FTTH Butterfly Cable Tension Clamp
Details
This tension clamp anchors outdoor FTTH butterfly drop cable with a reinforced nylon body and a shaped stainless steel hook. The pictured hook ends in a round eye for attachment to matching hardware. Specify the hook shape and steel grade for the fixing point, then confirm the required clamp configuration within the published 0.5–1.5 kN range.
Category
Fiber Tool
Share to
Description

FTTH Butterfly Cable Tension Clamp

This tension clamp anchors outdoor FTTH butterfly drop cable with a reinforced nylon body and a shaped stainless steel hook. The pictured hook ends in a round eye for attachment to matching hardware. Specify the hook shape and steel grade for the fixing point, then confirm the required clamp configuration within the published 0.5–1.5 kN range.

Product line: FTTH Butterfly Drop Hardware

Complete Butterfly Cable Clamp of the FTTH butterfly cable tension clamp

Butterfly Drop Clamp

0.5–1.5 kN tension options by configuration

Reinforced nylon · 201 or 304 stainless steel

View Configurations   Ordering Details

Molded Body and Eye Details

Configure the Hook and Body

Choose the hook with the bracket

The pictured eye accepts a compatible fixing. Supply the bracket drawing or a sample when the opening, clearance or hook shape is part of the order.

Specify 201 or 304 for the hook

Both stainless steel grades are listed for the metal attachment. Include the requested grade in the hardware schedule so it stays tied to the correct hook drawing.

Select the nylon formulation by configuration

The reinforced nylon body is specified for UV exposure outdoors. The published tension options vary with the body formulation. Confirm the chosen configuration against the project's load requirement.

Match the actual butterfly jacket

Send the jacket dimensions and profile drawing or a cable sample. Check where the cable will leave the clamp so the drop aligns with the next fixing point.

Configuration and Packing Reference

Parameter Specification
Cable profile FTTH butterfly drop cable
Clamp body UV-resistant reinforced nylon
Hook material 201 or 304 stainless steel
Hook geometry Round eye shown, shape can be specified
Published tension options 0.5–1.5 kN, depending on configuration
Packing reference 50 pieces per bag, 500 pieces per carton
Outer carton 40 × 30 × 26 cm

Specify Hardware for the Route

Anchor an outdoor subscriber drop

Pair the clamp with the bracket on the pole or exterior structure. Check the eye clearance and the direction in which the cable leaves the anchor when reviewing the attachment.

Standardize fittings across a rollout

Approve one hook drawing and body configuration for each repeated fixing point. Carry the drawing revision and tension requirement through the purchase order so crews receive the intended hardware.

Prepare lots for exposed locations

List the required hook grade and body configuration on each work pack. Group the clamp quantities by the approved attachment so the right parts arrive at each site.

Ordering Details

Check Details to provide
Butterfly cable Jacket cross-section and cable drawing or sample
Metal attachment Hook drawing, eye dimensions and 201 or 304 grade
Tension requirement Required load at the fixing point for configuration review
Quantity and packing Pieces by hook shape and selected configuration

Request a Fit Check

FTTH Drop Cables

About Glory Optical

Glory Optical manufacturing facility in Ningbo, China

Glory Optical facility, Ningbo

Glory Optical

Founded in 2008 · Ningbo, China · OEM/ODM support

Glory Optical works from Ningbo, where it began in 2008. It supplies optical cable, connection assemblies and passive network components, including the installation hardware that joins them on site.

Manufacturing & OEM/ODM Support

Glory Optical can coordinate mold development, molding and assembly across its range. For project orders, approved drawings and samples guide the part configuration, markings and packing.

Testing Capabilities

The three videos show examples of testing activities at Glory Optical.

Water Spray Testing

Watch on YouTube

Sealing Performance Testing

Watch on YouTube

Water Resistance Testing

Watch on YouTube

Project Supply & OEM Support

For butterfly drop clamp projects, share the mating bracket and the required anchor load. Glory Optical can use those details to review the hook, body configuration and quantities.

About Glory Optical | OEM/ODM Services

Discuss Your Product or Project Requirement

Include the cable cross-section and hook drawing with the quantities when requesting a quote.

Request a Quote | Email Sales

Email: sales@gloryoptic.com

Hot Tags: ftth butterfly cable tension clamp, China ftth butterfly cable tension clamp manufacturers, suppliers, factory, fiber optic cable splicing kit, fiber optic connector tool, fiber optic connector tool kits, fiber optic termination tool kit, fiber splicing tool, fo cable splicing kit

Send Inquiry