Figure-8 Drop Cable Clamp for FTTH Aerial Routes
Glory Optical's figure-8 drop cable clamp anchors 3–5 mm cable sections at pole-mounted FTTH and outdoor fiber access points. An aluminum shell and toothed gripping assembly connect to a 2.5 mm galvanized steel suspension wire through a hook-and-lock attachment. With a 3 kN breaking load, 310 × 53 × 25 mm dimensions and a 100 g unit weight, the clamp supports overhead drop connections and bracket-based anchoring layouts.
Figure-8 Drop Cable Clamp3–5 mm clamping section · 3 kN breaking load 310 × 53 × 25 mm · 100 g per clamp |
Figure-8 Drop Cable Clamp: Product Details
Toothed Gripping ChannelSide view of the metal teeth, body and wire connection. |
Aluminum Shell End ViewEnd view of the shell and cable-contact components. |
Wire and Hook DetailClose-up of the wire loop and upper attachment. |
Cable Grip and Suspension Features
2.5 mm Galvanized Suspension Wire
The 2.5 mm galvanized steel wire links the gripping body to the pole attachment. Its diameter and finish provide clear purchasing details for the suspension component in an overhead cable hardware schedule.
Aluminum Shell with Metal Gripping Teeth
The aluminum shell encloses the toothed cable-contact assembly. The side and end photographs show how the body, teeth and supporting components fit together around the cable entry path.
3–5 mm Cable-Section Fit
The gripping range covers cable sections from 3 to 5 mm. Match this range to the part held by the clamp when selecting figure-8 or other outdoor optical cable constructions.
3 kN Breaking Load
The clamp has a 3 kN breaking-load specification. Include the cable's anchoring requirements and route loading in the hardware selection so the mechanical schedule covers both the cable and its attachment.
Hook-and-Lock Attachment
The upper hook connects the suspension wire to supporting hardware. The clamp can be installed individually or incorporated into an anchoring arrangement with a compatible cable bracket.
100 g Assembly for Outdoor Routes
Each clamp weighs 100 g and measures 310 × 53 × 25 mm. The operating range is −40°C to +80°C, giving project teams defined size, handling and temperature data for outdoor deployment.
Technical Specifications
| Item | Specification |
|---|---|
| Product type | Figure-8 drop cable clamp |
| Product line | Aerial Cable Anchoring & Drop Hardware |
| Cable compatibility | Figure-8 optical cable and other compatible outdoor optical cables |
| Clamping-section diameter | 3–5 mm |
| Breaking load | 3 kN |
| Suspension wire | 2.5 mm galvanized steel wire |
| Shell and gripping teeth | Die-cast aluminum |
| Polymer components | PA6 |
| Overall dimensions | 310 × 53 × 25 mm |
| Unit weight | 100 g |
| Operating temperature | −40°C to +80°C |
| Attachment | Hook-and-lock structure |
| Installation | Pole mounting; individual clamp or compatible bracket assembly |
FTTH Aerial Cable Applications and Selection
Figure-8 Drop Cable Anchoring at FTTH Poles
A figure-8 drop leaving a distribution pole needs a cable grip matched to the section being anchored. A clamp selected only by the cable's overall shape can leave the contact profile unclear. This figure-8 drop cable clamp uses a toothed assembly for a 3–5 mm clamping section, with a suspension wire leading to the pole attachment. Use it at the outgoing drop anchor on an FTTH aerial route. Include a cable cross-section, the gripped-section dimensions and the pole bracket interface when preparing the installation order.
Bracket Assemblies for Outdoor Fiber Branches
A branch node may require the cable to approach its anchor from a particular direction, while the available bracket defines the connection point. Ordering the grip without its mounting interface leaves these parts to be matched on site. The hook-and-lock attachment connects this clamp to compatible supporting hardware, and the product supports individual or bracket-based installation. For an outdoor fiber branch at a pole, schedule the cable profile, hook clearance and bracket arrangement together. Use the 310 × 53 × 25 mm assembly dimensions when reviewing the hardware layout.
Overhead Access Network Hardware Packages
An overhead access project can combine several cable constructions and anchor positions along one route. Grouping all clamps under a general hardware description makes quantities and cable pairings harder to check. This clamp provides a defined 3–5 mm gripping range, 3 kN breaking load and 100 g unit weight for the selected outdoor optical cable connection. Assign it to the corresponding pole anchor in the route bill of materials. Record cable type, site loading, attachment hardware and quantities by location, then carry the temperature range into the equipment schedule.
Ordering for Pole and Cable Layouts
| Order item | Project information |
|---|---|
| Cable and gripping section | Cable construction, cross-section and 3–5 mm gripped-section diameter |
| Mechanical selection | Cable anchoring requirement, route loading and 3 kN breaking-load specification |
| Mounting interface | Pole attachment, hook clearance and bracket connection |
| Assembly arrangement | Individual clamp or clamp with compatible supporting hardware |
| Project identification | Quantity by anchor location, item label and packing instructions |
Fiber Installation Tools and Accessories · Outdoor Fiber Optic Cables
About Glory Optical
|
Glory Optical facility, Ningbo |
Glory OpticalFounded in 2008 · Ningbo, China · OEM/ODM support Ningbo Glory Optical Communication Co., Ltd. manufactures passive fiber optic products and supplies telecom operators, ISPs, contractors, distributors and OEM/ODM buyers. Our portfolio covers fiber boxes, splice closures, PLC splitters, fiber optic cables, patch cords, pigtails, adapters, MTP/MPO assemblies and installation accessories for fiber network projects. Manufacturing & OEM/ODM SupportManufacturing capabilities across our product families include mold development, enclosure molding, component assembly and fiber cable assembly. OEM/ODM projects can cover drawings, product configuration, samples, branding, labels and packaging, according to the selected product and confirmed requirements. |
Testing Capabilities
Glory Optical supports inspection and testing according to confirmed product specifications and order requirements. The following videos show examples from our testing activities.
Water Spray Testing |
Sealing Performance Testing |
Water Resistance Testing |
Project Supply & OEM Support
For figure-8 drop cable clamp orders, share the cable cross-section, pole connection and quantities by route. Glory Optical can discuss matching hardware, samples, project identification and packing for the selected installation arrangement.
Discuss Your Product or Project Requirement
Send the cable profile, quantity, application and required configuration for quotation or sample discussion. Include any drawing, labeling, packaging and documentation requirements so our team can review the order details.
Email: sales@gloryoptic.com
Hot Tags: figure-8 drop cable clamp, China figure-8 drop cable clamp manufacturers, suppliers, factory, fiber optic connector tool kits, fiber optic termination kit, fiber splicing tool, fiber tool, fo cable splicing kit, ftth tool kit