Tool-Free U-Shaped FTTH Drop Cable Clamp
This U-shaped FTTH drop cable clamp routes the incoming and outgoing portions of a drop cable toward the same side of the body. The hand fitted assembly combines a molded nylon guide with a formed stainless steel attachment. The catalog lists a 2–5 mm cable diameter range. Butterfly cable can also be considered by checking its width, thickness and jacket profile on a sample.
Product line · FTTH Aerial Drop Cable Hardware
Same-Side Cable Entry and Exit2–5 mm round cable OD PA6 or PA66 body · 201 or 304 stainless wire |
How the Cable Returns Through the Clamp
Plan both cable legs around the return
The cable changes direction through the guide and the two legs leave toward the same side. Draw both legs at the fixing point when checking a route near a wall, bracket or enclosure. One leg may lead back to the aerial span while the other continues toward the building. The layout needs room for each leg and for the cable maker's minimum bend radius.
Check how the grip seats during hand fitting
The clamp is designed for hand fitting and uses a self adjusting grip. At sample review, follow the supplied routing instructions and check where the jacket meets the guide. Observe the two legs near the exit, where a twist or crossover can change the way the cable sits. Use the approved sample as a visual reference for the fitted assembly.
Specify the stainless wire with its shape
The attachment is available in 201 or 304 stainless steel. The wire diameter and profile are configuration details. Use a drawing of the connection to check the opening, reach and the space required to engage the attachment. This is useful when replacement hardware must meet a bracket already on site. A side view of the assembly shows how far the wire extends beyond the nylon body. Specify the selected nylon grade on the same line as the attachment.
Compare size and breaking load on the same row
The three listed lengths are 145, 160 and 190 mm. Each length is paired with a specific unit weight and breaking load in the table. Select the attachment and body together, then review the complete cable and clamp assembly against the service load for that drop. Keep the chosen length and load reference together on the purchase schedule.
Clamp Configurations and Packing
| Parameter | Specification |
|---|---|
| Cable application | Small round or compatible butterfly profile FTTH drop cable |
| Round cable outside diameter | 2–5 mm |
| Body and attachment options | PA6 or PA66 nylon with 201 or 304 stainless steel wire |
| 145 mm reference length | 36 g per clamp, 0.95 kN breaking load |
| 160 mm reference length | 43 g per clamp, 0.6 kN breaking load |
| 190 mm reference length | 38 g per clamp, 0.85 kN breaking load |
| Packing | 50 pieces per subpack, 300 pieces per carton |
| Outer carton | 40 × 30 × 30 cm |
Prepare for the First Installation
Molded Guide and Wire BailSide view showing the rounded guide in the nylon body and the offset profile of the formed wire bail. |
Make a routing sketch before the site trial
Show the cable approach, the point where it returns and the route to the next cable guide. Check the proposed direction before setting the clamp position. Where another fitting is close by, include it on the sketch so the crew can see whether either cable leg needs more space to reach the next support without bearing on an edge.
Trial round and butterfly jackets independently
Measure the outside diameter on the round sample. For a butterfly cable, record both cross section dimensions and the way the flat faces lie in the guide. Review both legs of the cable after seating. The approved cable and clamp combination should appear on the work sheet, particularly when the two cable profiles are used in the same rollout.
Review the fitted cable from both sides
Look at the return from the side and from the cable exit. Include the cable ID and the attachment drawing in the photo record. This makes it possible to compare later installations with the approved sample. Where optical or mechanical checks form part of acceptance, record which cable, attachment and body were used.
Sort stock by attachment length
Identify the length and wire profile on each label before allocating stock. The catalog packing quantity is 50 clamps per subpack. Keep subpacks together where crews use more than one length, and count the assemblies by the approved purchase line. This helps the receiving team match the parts to the site drawings.
Ordering Details
| Check | Details to provide |
|---|---|
| Cable sample | Round diameter or butterfly width and thickness, plus cable drawing |
| Return route | Fixing point sketch showing both cable legs and clearance |
| Attachment | Wire shape, stainless grade and required service load |
| Quantities | Counts for each approved length and attachment configuration |
Request a Cable and Clamp Review
About Glory Optical
|
Glory Optical facility, Ningbo |
Glory OpticalFounded in 2008 · Ningbo, China · OEM/ODM support Glory Optical began operations in Ningbo in 2008. Its passive fiber range includes drop cable, connection assemblies, optical splitters, enclosures and hardware for installing access networks. Manufacturing & OEM/ODM SupportOur work includes mold development, molded enclosures and assembly of fiber cables and components. For project orders, agreed drawings and sample details guide production, labeling and packing. |
Testing Capabilities
The following videos show testing activities at Glory Optical.
Water Spray Testing |
Sealing Performance Testing |
Water Resistance Testing |
Project Supply & OEM Support
Send the cable profile and a sketch of the return path when requesting a sample. Our team can review the configuration alongside the attachment detail and planned quantities.
Discuss Your Product or Project Requirement
Include the desired clamp lengths and quantities when requesting a quotation.
Email: sales@gloryoptic.com
Hot Tags: u-shaped ftth drop cable clamp, China u-shaped ftth drop cable clamp manufacturers, suppliers, factory, fiber cable termination kit, fiber optic cable test equipment, fiber optic connector tool, fiber optic tool bag, fiber tool, fiber tool box