SC APC to SC APC Simplex OS2 Fiber Patch Cable for FTTH and PON Links
Glory Optics SC APC to SC APC simplex OS2 fiber patch cable is designed for singlemode indoor links where green APC connectors, low reflection and stable bend performance are required. With G.657.A1 bend-insensitive fiber, a 2.0mm PVC OFNR jacket and precision SC/APC terminations, it is suitable for FTTH subscriber connections, optical distribution frames, PON equipment, telecom rooms and indoor fiber extension routes.

Made for SC/APC Singlemode Access Points
SC/APC patch cables are widely used in fiber access networks because the angled end-face helps reduce reflected signal in PON and long-distance singlemode systems. This cable is a direct SC/APC-to-SC/APC jumper for indoor routes where both ports use green APC interfaces.
Where It Fits Best
Use it between a fiber wall outlet and ONT, between ODF and PON equipment, inside telecom rooms, or as a clean indoor replacement cable when the original SC/APC jumper is too short.
Key Features
This page focuses on practical field value: correct APC matching, bend-resistant indoor routing, stable optical performance and easier project ordering.
Technical Specifications
| Product Name | SC APC to SC APC Simplex OS2 Single Mode Fiber Patch Cable |
|---|---|
| Connector A | SC APC Simplex |
| Connector B | SC APC Simplex |
| Fiber Grade | G.657.A1, compatible with G.652.D |
| Fiber Mode | OS2 9/125μm singlemode |
| Wavelength | 1310 / 1550 nm |
| Insertion Loss | ≤0.3 dB |
| Return Loss | ≥60 dB |
| Minimum Bend Radius - Fiber Core | 10 mm |
| Minimum Bend Radius - Cable | 10D / 5D, dynamic / static |
| Attenuation at 1310 nm | 0.36 dB/km |
| Attenuation at 1550 nm | 0.22 dB/km |
| Fiber Count | Simplex, 1 fiber |
| Cable Diameter | 2.0 mm |
| Cable Jacket | PVC, Riser / OFNR |
| Jacket Color | Yellow |
| Polarity | A (Tx) to B (Rx) |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -40°C to +80°C |
Typical Connection Route
This cable is often used as the final indoor jumper between an optical access point and customer-side equipment. Always confirm that both ports are SC/APC before installation.
Application Scenarios
ONT Extension Cable
Used when the original fiber jumper is too short and the ONT needs a better location near a router or cabinet.
SC/APC PON Access Links
Suitable for GPON, XGS-PON and other passive optical networks where SC/APC interfaces are specified.
Telecom Room Patching
Connect SC/APC adapter panels, splitters, ODF ports or access equipment in controlled indoor telecom spaces.
Apartment Fiber Routing
Works for MDU subscriber rooms and fiber wall sockets where a thin simplex jumper is easier to route.
Field Test Jumper
Can be used during optical power verification when both test device and network port require SC/APC.
Replacement Jumper
Useful for replacing kinked, dirty or overly short indoor patch cords without re-terminating the drop cable.
Installation and Handling Notes
Poor handling can still cause high loss, intermittent service or connector damage. These notes help installers use the product correctly.
- Confirm both device ports are SC/APC before connecting the cable.
- Do not mate green APC connectors with blue UPC adapters or connectors.
- Clean connector end-faces before final patching or testing.
- Avoid tight bends, door pressure, cable pinching and sharp corner routing.
- Keep dust caps on both ends until the cable is ready to be connected.
- Route the 2.0mm cable with enough slack near wall outlets, ONTs and cabinets.
Common Ordering Mistakes to Avoid
Many SC patch cables look similar online. The key risk is ordering the wrong polish, wrong connector size, wrong cable rating or wrong length.
Check Before Purchase
- SC is the large square connector; LC is smaller and not interchangeable.
- APC is normally green; UPC is normally blue. Do not mix them.
- Simplex means one fiber. Choose duplex only if the link requires two fibers.
- 2.0mm indoor cable is flexible, but it is not a rugged outdoor drop cable.
- For in-wall or exposed routes, confirm local jacket rating and installation rules.
RFQ Information
To quote the correct patch cable, please confirm connector type, polish, fiber mode, length, jacket rating, cable diameter and packaging.
| RFQ Item | Standard Configuration | What to Confirm |
|---|---|---|
| Connector Type | SC APC to SC APC | If one side is blue, request SC UPC or a hybrid cable. |
| Fiber Mode | OS2 9/125μm singlemode | Use OS2 for singlemode FTTH/PON links. Do not replace it with multimode OM cable. |
| Fiber Count | Simplex, 1 fiber | Choose duplex only if the system needs separate transmit and receive fibers. |
| Cable Jacket | 2.0mm PVC OFNR | For plenum, LSZH or outdoor installation, specify a different jacket requirement. |
| Length | 1m reference configuration | Share the required route length and add slack for cabinet or ONT positioning. |
| Labeling | Standard product label | Custom labels, SKU numbers and private-label packaging can be discussed for bulk orders. |

Our Quality Promise
Comprehensive 3-Year Warranty
We confidently back all our products with a 3-year warranty. Our specific service policy is: within one year for quality issues, we take full responsibility for returns; within two years, for replacements; and within three years, for repairs.
Clear & Competitive MOQ
We welcome both trial and bulk orders. Our standard Minimum Order Quantity (MOQ) is 50 units. We also offer free samples for testing to help you evaluate our quality with confidence.
Fast & Reliable Logistics
We guarantee delivery within 10 days for standard items. Our logistics advantage includes cost-effective door-to-door service to simplify shipping for you.
Our Foundation
Backed by 18 years of experience since 2008, we control quality from our own factory, accept OEM/ODM requests, and maintain ready stock for wholesale. We focus on delivering the optimal balance of price and quality directly to end customers worldwide.
Your trust is our priority. Partner with us for dependable fiber optic solutions supported by clear promises.
Hot Tags: sc apc to sc apc simplex os2 fiber patch cable, China sc apc to sc apc simplex os2 fiber patch cable manufacturers, suppliers, factory