LC UPC to LC UPC Short Boot Duplex OM3 Fiber Patch Cable for High-Density 10G/40G/100G Links
Glory Optical LC UPC to LC UPC short boot duplex OM3 fiber patch cable is built for data centers, telecom networks and enterprise cabling environments where fast plug-and-play deployment, clean cross-connection and limited rack space are key requirements.
The bend-insensitive OM3 50/125μm fiber, 12mm short boot LC connectors and 2.0mm OFNR tight-buffered aqua jacket make it suitable for short- to medium-distance multimode Ethernet interconnects and high-density patching zones.
Pre-Terminated Cable for Fast Interconnect and Cross-Connect
Pre-terminated LC duplex jumpers provide a ready-to-use plug-and-play solution for large cabling systems. They reduce field termination work, shorten installation time and make moves, adds and changes easier in equipment rooms, MDA/EDA zones, telecom racks and enterprise network cabinets.
Why the Short Boot Matters
The 12mm short boot removes the need for a long heat-shrink tube and shortens the connector assembly by about 30% compared with many standard-boot designs. This gives installers more routing freedom in narrow spaces while improving cable flexibility without affecting transmission performance.
Key Features
This page positions the cable around real deployment value: carrier-grade transmission stability, compact boot design, bend-insensitive routing and faster high-density installation.
Technical Specifications
| Product Name | LC UPC to LC UPC Short Boot Duplex OM3 Multimode Fiber Patch Cable |
|---|---|
| Reference Length | 1m / 3ft |
| Connector A | LC UPC Duplex |
| Connector B | LC UPC Duplex |
| Fiber Count | 2 fibers |
| Fiber Grade | Bend-insensitive fiber |
| Fiber Mode | OM3 50/125μm multimode |
| Wavelength | 850 / 1300nm |
| Flame Rating | Riser / OFNR |
| Cable Outer Diameter | 2.0mm |
| Boot Type | 12mm short boot |
| Jacket Color | Aqua |
| Polarity | A (Tx) to B (Rx) |
| Cable Type | Tight-buffered |
| Minimum Bend Radius - Fiber | 7.5mm |
| Minimum Bend Radius - Cable | 20D / 10D, dynamic / static |
| Connector Durability | 1000 mating cycles |
| Tensile Strength | 90 / 150N, long-term / short-term |
| Insertion Loss | ≤0.3dB |
| Return Loss | ≥30dB |
| Attenuation at 850nm | ≤3.5dB/km |
| Attenuation at 1300nm | ≤1.5dB/km |
| Operating Temperature | -10°C to +70°C |
| Storage Temperature | -20°C to +70°C |
| Compliance | Project compliance documents and test records can be provided according to order requirements. |
Connection Solutions
This duplex OM3 cable can support compatible multimode transceiver channels and rack-level interconnects when the selected optics, distance and link budget are matched correctly.
Application Scenarios
High-Density Rack Patching
Short boot BIF cable is suitable for MDA and EDA patching zones where cables must pass through narrow spaces cleanly.
Equipment Interconnect
Connects LC duplex multimode ports between switches, panels and optical equipment in telecom network rooms.
Enterprise LAN Rooms
Used for enterprise network upgrades, switch-to-panel jumpers and local backbone cross-connects.
10G SR Interconnect
OM3 provides higher bandwidth than legacy multimode fiber and is cost-effective for short- to medium-distance 10G Ethernet.
Compatible Duplex Links
Can be used in 40G/100G duplex multimode applications when paired with the correct optics and distance plan.
Visual Port Identification
Aqua color-coded jacket helps installers identify OM3 paths quickly, reducing installation and testing time.
Installation and Maintenance Notes
Short boot cables simplify high-density installation, but correct routing and inspection still matter for long-term performance.
- Use with LC UPC duplex multimode ports and matching OM3 or compatible multimode channels.
- Do not use this OM3 aqua jumper as a replacement for OS2 yellow singlemode links.
- Follow A-to-B polarity for common duplex fiber applications unless the project specifies otherwise.
- Avoid tight tie-wraps, sharp bends, cabinet door pressure and overfilled cable managers.
- Keep the cable above its minimum bend radius during routing and after cabinet doors are closed.
- Clean LC connector end-faces before final patching or optical testing.
Common Ordering Mistakes to Avoid
LC patch cables may look similar, but small differences in fiber mode, boot length, polarity and jacket rating can result in the wrong product for the rack build.
Check Before Purchase
- Choose OM3 aqua for OM3 multimode links, not OS2 yellow singlemode links.
- Choose the 12mm short boot when rear clearance is limited behind LC ports.
- Choose duplex when the transceiver uses separate Tx/Rx fibers.
- Confirm OFNR is acceptable for the installation area before ordering.
- Confirm length with cable management slack, not only port-to-port distance.
Standard vs Short Boot Selection
For Glory product pages, this comparison helps customers understand why this model should be chosen instead of a standard LC OM3 patch cord.
RFQ Information
To quote the correct cable, please confirm connector type, boot type, fiber mode, length, jacket rating, cable diameter and packaging.
| RFQ Item | Standard Configuration | What to Confirm |
|---|---|---|
| Connector Type | LC UPC Duplex to LC UPC Duplex | Confirm LC/LC or hybrid LC/SC, UPC or APC polish. |
| Boot Type | 12mm short boot | Use short boot for high-density racks and tight rear-clearance panels. |
| Fiber Mode | OM3 50/125μm bend-insensitive fiber | Confirm OM3, OM4, OM5, OM2 or OS2 according to the link design. |
| Fiber Count | 2 fibers, duplex | Confirm simplex or duplex depending on transceiver requirements. |
| Cable Jacket | 2.0mm PVC OFNR | Specify LSZH, plenum or other jacket if the project requires it. |
| Length | 1m / 3ft reference | Provide route length plus slack for cable managers and panel movement. |
| Packaging | 1 piece per bag or project-based packing | OEM label, barcode, SKU label or bulk pack can be discussed for volume orders. |
FAQ
Q: What is the main advantage of a 12mm short boot LC patch cable?
A: The short boot reduces rear projection behind the connector, helping the cable bend more naturally in high-density racks, patch panels and switch ports with limited clearance.
Q: Is this cable singlemode or multimode?
A: This product page is for OM3 50/125μm multimode fiber. It should not be used as a replacement for OS2 singlemode patch cables.
Q: What does the aqua jacket mean?
A: Aqua is commonly used to identify OM3 multimode cabling, helping technicians distinguish it from yellow OS2 singlemode or other fiber categories in mixed racks.
Q: Can this cable be used for 10G, 40G or 100G links?
A: It can be used for compatible duplex multimode links when the optics, distance, channel design and link budget match the project requirement. Always confirm the transceiver type before ordering.
Q: Can this OM3LCSDX-type cable be installed outdoors?
A: No. This is an indoor OFNR riser cable. For outdoor, aerial, duct, direct burial or harsh environments, choose an outdoor-rated fiber cable instead.
Q: What is the benefit of the no heat-shrink short boot design?
A: It improves cable flexibility, makes the connector easier to route through narrow spaces, and simplifies installation and maintenance without compromising optical performance.
Our Quality Promise
Comprehensive 3-Year Warranty
We confidently back all our products with a 3-year warranty. Our specific service policy is: within one year for quality issues, we take full responsibility for returns; within two years, for replacements; and within three years, for repairs.
Clear & Competitive MOQ
We welcome both trial and bulk orders. Our standard Minimum Order Quantity (MOQ) is 50 units. We also offer free samples for testing to help you evaluate our quality with confidence.
Fast & Reliable Logistics
We guarantee delivery within 10 days for standard items. Our logistics advantage includes cost-effective door-to-door service to simplify shipping for you.
Our Foundation
Backed by 18 years of experience since 2008, we control quality from our own factory, accept OEM/ODM requests, and maintain ready stock for wholesale. We focus on delivering the optimal balance of price and quality directly to end customers worldwide.
Your trust is our priority. Partner with us for dependable fiber optic solutions supported by clear promises.
Hot Tags: lc upc to lc upc short boot duplex om3 fiber patch cable, China lc upc to lc upc short boot duplex om3 fiber patch cable manufacturers, suppliers, factory, fiber optic cable connection, fiber optic patch cable, fiber patch cables, fiber sc to sc patch cord, lc fiber patch cables, single mode sc to lc patch cord
