One enclosure for feeder entry, fiber splicing, splitter routing and drop distribution
The GL-FDB-96B is designed for the distribution layer of an FTTH optical distribution network. It gives installers a protected point to secure incoming cables, organize fusion splices, store controlled fiber slack and route outputs toward subscriber drops. The compartmented internal layout helps keep working fibers separated from cable fixation and storage areas during installation and maintenance.
Best fit
Use this model where a compact outdoor node must serve multiple drops while retaining more splice-tray capacity than a conventional 16-port wall box. It is particularly useful for phased deployment, feeder branching and projects that need reserve fibers inside the same enclosure.
Confirm another enclosure when:
- Each subscriber requires an individually hardened connector port.
- The location is exposed to flooding, continuous immersion or high-pressure washdown.
- The splitter package or cable diameter cannot fit the selected internal layout.
Built around field access, routing control and configuration flexibility
The enclosure is not only a protective shell. Its value comes from how it separates cable entry, splice handling, splitter placement and drop routing so technicians can work without disturbing unrelated fibers.
PC+ABS enclosure
Impact-resistant composite housing provides a practical balance of mechanical protection, weight and outdoor durability for wall and pole installations.
Layered internal management
Splice trays, cable fixation and slack-storage areas are arranged to reduce crossing between feeder fibers, pigtails and outgoing fibers.
Splitter-ready routing
Internal space can be configured for compact PLC splitters, including common 1×4, 1×8 and 1×16 ratios, subject to package dimensions.
Dual main cable entry
Two primary cable entry positions support feeder entry, branching or pass-through planning while retaining dedicated routing for drop cables.
Serviceable splice trays
Removable or hinged tray access helps technicians complete fusion work and return trays to position without rebuilding the entire fiber route.
Three mounting methods
The same enclosure platform can be specified for direct wall mounting, pole mounting or aerial messenger-wire installation.
GL-FDB-96B standard product data
Use the table as a quotation starting point. Final port layout, tray count, cable-entry range and loaded components should be locked on an approved drawing and BOM.
| Specification | Details |
|---|---|
| Model Name | Fiber Distribution Box |
| Application | FTTx Communication Networks |
| Waterproof Grade | IP65/IP68 |
| Material | ABS+PC Composite |
| Color | White (Customizable) |
| Capacity | 16 ports, 96 cores maximum |
| Operating Temperature | -25°C to +60°C |
| Installation Methods | Pole-mounted, Wall-mounted, Overhead cable installation |
| External Dimensions | 353mm × 228mm × 135mm |
| Net Weight | 1.9kg |
Choose the loading level that matches your installation workflow
Standardizing the loaded scope across a rollout reduces field assembly time and makes quotations comparable. The box can be supplied at different levels depending on whether your team installs passive components in the factory or on site.
Enclosure Only
For buyers who already control the internal passive-component BOM.
- Housing and sealing components
- Splice trays and routing hardware
- Cable fixation accessories
- Selected mounting kit
- No splitter, adapters or pigtails
Splice-Ready Kit
For field teams that splice on site but want all mechanical accessories matched.
- Complete enclosure assembly
- Configured splice trays
- Glands, grommets and blanking plugs
- Mounting hardware and labels
- Optional pigtails and adapters
Factory-Loaded
For repeat deployments with a locked port map and standardized splitter ratio.
- Selected PLC splitter installed
- Matched pigtails and adapters
- Pre-routed internal fibers
- Port numbering and BOM
- Optical test report for loaded components
Adapt the enclosure to the site instead of forcing one mounting method
The mounting method should be specified together with cable direction, service height and maintenance clearance. Each option requires the correct bracket or strap kit.
Designed for practical FTTH distribution points
The enclosure works best where feeder and distribution fibers need a protected, serviceable transition before the final subscriber drop.
Residential Street FTTH
Distributes fibers from an outdoor feeder or distribution cable toward multiple homes from a shared wall or pole node.
MDU Building Entry
Provides reserve splicing and drop routing at the building entrance before fibers continue to risers or floor boxes.
Pole-Mounted Access Node
Keeps feeder fixation, splice trays and outgoing drop routes accessible above ground for maintenance teams.
Aerial Distribution Route
Supports messenger-mounted sections where a conventional wall location is unavailable along the cable path.
Send these details to receive a comparable quotation
Network and mechanical data
Optical and loading data
Define acceptance around the delivered configuration
For project procurement, the enclosure, sealing parts and loaded optical components should be checked as one delivered system rather than as unrelated parts.
FAQ
Q: Is GL-FDB-96B a 16-port box or a 96-fiber box?
A: It is specified with 16 service positions and a splice-tray system that can be configured for up to 96 fusion splices. Port count and splice capacity are different values, so both should appear in the quotation.
Q: Can the box hold a PLC splitter?
A: Yes. The internal layout can support compact PLC splitter packages, including common 1×4, 1×8 and 1×16 ratios. The exact package dimensions and fiber fan-out must be checked before the BOM is finalized.
Q: Can it be supplied with SC/APC adapters and pigtails?
A: A loaded version can be configured with the required adapters, pigtails and PLC splitter. State the connector polish, pigtail length, fiber type and port map in the RFQ.
Q: Is IP65 suitable for outdoor use?
A: IP65 can suit sheltered outdoor wall or pole locations. Final suitability also depends on cable-entry sealing, unused-port plugs, mounting orientation and exposure. Higher-risk locations should be reviewed against the project environmental requirement.
Q: What mounting accessories are available?
A: The product can be configured for wall mounting, pole mounting or messenger-wire mounting. Include the required mounting method in the order so the correct bracket, strap or clamp set is supplied.
Q: Does the enclosure support uncut feeder cable routing?
A: Its dual main cable-entry arrangement can be used for feeder entry, branching or pass-through planning. The approved cable route and fixation method should be shown on the project drawing before installation.
Q: What information is required for a quotation?
A: Send the quantity, mounting method, splice capacity, loaded scope, splitter ratio and package, adapter polish, feeder and drop cable diameters, cable-entry quantity, IP requirement, labels, documentation and delivery schedule.
Q: Can the enclosure be customized?
A: Project customization can include internal tray arrangement, loaded optical components, labels, logo marking, packaging and mounting accessories, subject to engineering confirmation and order quantity.
Our Quality Promise
Comprehensive 3-Year Warranty
We confidently back all our products with a 3-year warranty. Our specific service policy is: within one year for quality issues, we take full responsibility for returns; within two years, for replacements; and within three years, for repairs.
Clear & Competitive MOQ
We welcome both trial and bulk orders. Our standard Minimum Order Quantity (MOQ) is 50 units. We also offer free samples for testing to help you evaluate our quality with confidence.
Fast & Reliable Logistics
We guarantee delivery within 10 days for standard items. Our logistics advantage includes cost-effective door-to-door service to simplify shipping for you.
Our Foundation
Backed by 18 years of experience since 2008, we control quality from our own factory, accept OEM/ODM requests, and maintain ready stock for wholesale. We focus on delivering the optimal balance of price and quality directly to end customers worldwide.
Your trust is our priority. Partner with us for dependable fiber optic solutions supported by clear promises.
Hot Tags: high quality fiber distribution box, China high quality fiber distribution box manufacturers, suppliers, factory, fiber breakout box, fiber optic termination cabinet, Fiber Termination Enclosure, Optical Fiber Distribution Box, Outdoor Fiber Box, outdoor fiber distribution box
