Compact Four-Fiber Termination at the FTTH Endpoint
The FTB-104A fixes and organizes the transition from an incoming fiber cable to connectorized pigtails in a small wall-mounted format. Four adapter positions present the optical connections for patching or subscriber-side access without using the footprint of a larger distribution box.
Network function
The enclosure provides a protected termination point between feeder or drop cabling and 0.9 mm pigtails. Its four-fiber capacity fits small FTTH, FTTB, CATV and premises connections where the endpoint needs organized access to SC interfaces.
Four-port terminal role
The FTB-104A is designed for compact termination and patching at a low-count endpoint. Adapter quantity, optical fiber type, polish configuration, pigtail count and loaded or unloaded supply format can follow the connection schedule for the specific site.
Selection principle
Select this model when the project needs no more than four presented SC connections in a compact wall enclosure. Use a distribution box or splitter-ready terminal when the node must also support higher splice density, multiple subscriber drops or an integrated PLC splitter.
Product selling points
FTB-104A FTTH Optical Terminal Box Features
The enclosure dimensions, adapter field, pigtail format, access structure, mounting method and packing data each support a distinct project decision.
Four-Fiber Capacity in a 30 mm-Deep Housing
The 117.8 × 137.4 × 30 mm enclosure supports up to four fiber connections. Compared with a multi-subscriber distribution box, the shallow footprint is easier to place at a villa, apartment, office or covered building endpoint where wall area is limited and the connection schedule contains four fibers or fewer.
Four SC/APC Adapter Positions
Four SC/APC adapter positions create a defined connector field for FTTH patching. The same SC-format terminal can be ordered around the project's single-mode, multimode or APC single-mode adapter requirement, helping the buyer align the box with installed pigtails, patch cords and active-equipment ports.
0.9 mm Pigtail Compatibility
The internal termination format is compatible with 0.9 mm pigtails. This buffered size suits compact splice-to-adapter routing and avoids dressing a heavier patch-cord jacket inside a small terminal. Pigtail quantity, fiber type, connector polish and length can be defined in the project bill of materials.
Hinged Access with Press-Pull Locking
A hinged cover and press-pull button lock provide repeatable technician access without specifying a separate screw-removal sequence. The arrangement supports inspection, connector handling and pigtail organization at subscriber and building termination points while keeping the enclosure closed during normal operation.
Wall-Mounted Plastic Enclosure
The plastic housing provides mechanical protection and is designed for wall mounting. It separates the termination components from incidental contact in residences, villas, small commercial premises and protected telecom areas. The mounting surface and the environmental protection required at the selected location should be defined before hardware selection.
Defined Carton Configuration
The packing format is 50 units per 750 × 340 × 295 mm outer carton, with 27 kg gross carton weight and 0.5 kg stated net weight per unit. These figures give distributors and project buyers a documented basis for carton planning, warehouse handling and order consolidation.
Product configuration
FTB-104A Product Family and Connection Options
The product family contains one four-port housing model. Configuration work therefore centers on the optical interface and supplied internal components rather than on multiple enclosure capacities.
Technical data
FTB-104A FTTH Optical Terminal Box Specifications
The tables separate fiber capacity, adapter port count, physical construction and packing data so each value can be used correctly in a project BOM.
General Technical Specifications
Product data for the FTB-104A enclosure.
| Item | FTB-104A Specification | Project Use |
|---|---|---|
| Product model | FTB-104A | Use on drawings, schedules and packing records. |
| Product family | FTTH optical terminal box | Compact endpoint termination and patching. |
| Fiber capacity | Up to 4 fibers | Maximum fiber connections supported by the housing. |
| Adapter port count | 4 ports | Number of presented SC-format adapter positions. |
| Connector configuration | SC/APC | Match pigtails and patch cords to the same SC/APC interface. |
| Fiber/adapter options | SC adapters for single-mode, multimode or APC single-mode applications | Select one optical configuration for the project connection schedule. |
| Pigtail compatibility | 0.9 mm pigtails | Internal splice-to-adapter routing. |
| Enclosure material | Plastic | Wall-mounted mechanical protection for the termination components. |
| Dimensions | 117.8 mm (W) × 137.4 mm (H) × 30 mm (D) | Use for wall-space and clearance planning. |
| Mounting method | Wall mounted | Residential, villa, commercial and MDU termination locations. |
| Cover and lock | Hinged cover with press-pull button lock | Provides access for connector and pigtail work. |
| Net weight | 0.5 kg per unit | Carton and warehouse planning. |
Model and Capacity Table
| Model | Fiber Capacity | Adapter Ports | Interface | Dimensions (W × H × D) | Mounting |
|---|---|---|---|---|---|
| FTB-104A | Up to 4 fibers | 4 SC-format ports | SC/APC | 117.8 × 137.4 × 30 mm | Wall mounted |
Connector and Pigtail Compatibility
| Component | Compatibility | BOM Decision |
|---|---|---|
| Adapter format | SC, four positions | Confirm populated adapter quantity from 1 to 4. |
| Connector polish | SC/APC fitted configuration | Use matching APC pigtails and patch cords for this configuration. |
| Fiber system options | Single-mode, multimode or APC single-mode SC adapter configurations | State the optical fiber system and connector plan on the order. |
| Pigtail construction | 0.9 mm pigtail compatibility | Define pigtail quantity, fiber type, polish and length in the BOM. |
Packing Information
| Model | Net Weight | Outer Carton Size | Gross Carton Weight | Quantity per Carton |
|---|---|---|---|---|
| FTB-104A | 0.5 kg/pc | 750 × 340 × 295 mm | 27 kg/carton | 50 pcs/carton |
Network applications
FTTH Optical Terminal Box Applications and Solutions
The FTB-104A is intended for low-count termination nodes. The site design should match the enclosure's four presented connections to the actual cable, pigtail and patching plan.
Four-Port FTTH Optical Terminal Box for Residential Endpoints
A large splitter box at a single home or villa consumes wall space and introduces unused trays and ports. The FTB-104A limits the endpoint to four fiber connections in a 117.8 × 137.4 × 30 mm wall enclosure, creating an organized transition between the FTTH drop or feeder side and SC-connected pigtails or patch cords. It is installed at a protected subscriber termination or building entry near the route to the ONT. Before procurement, confirm active fiber count, SC/APC mating interface, pigtail fiber type and length, wall substrate, cable route and whether the terminal is supplied loaded.
FTTB and MDU Low-Count Fiber Termination
Using only an adapter plate at an apartment or small MDU zone leaves pigtails and cable transitions exposed, while a high-capacity enclosure may be disproportionate to a four-fiber branch. The FTB-104A adds a plastic housing with mechanical protection, four SC-format positions and 0.9 mm pigtail compatibility at a corridor telecom point, apartment entrance or protected riser endpoint. It can connect a low-count building cable to subscriber-side patching. The order should identify single-mode or multimode service, connector polish, populated port quantity, pigtail schedule, mounting location and any site-specific environmental enclosure requirement.
Small Commercial and CATV Fiber Endpoint
A bare splice or loosely mounted adapter near an office, shop or CATV endpoint makes inspection and service changes harder to control. The FTB-104A brings up to four connections into a hinged, press-pull wall enclosure and presents them through SC adapters for patching to the downstream optical equipment. Its compact depth suits protected communications spaces where a rack panel is not justified. Procurement should confirm whether the link uses single-mode, multimode or APC single-mode components, then align the four adapter positions with the pigtail and patch-cord schedule and the available wall clearance.
OEM FTTH Optical Terminal Box Procurement
Ordering a generic "four-core FTTH box" can still produce mismatched polish, incomplete pigtail sets or packaging that does not fit the distributor's workflow. FTB-104A procurement starts from one defined housing and adds the project-specific adapter and 0.9 mm pigtail configuration. The terminal can be supplied for residential, FTTB, CATV or MDU endpoint schedules, with the 50-unit carton format supporting bulk planning. The purchase order should state model, active fibers, populated ports, SC optical configuration, pigtail details, loaded or unloaded supply, labeling, packing marks and approved sample or drawing reference.
Project ordering
FTB-104A Ordering Configuration
Use the following fields in an RFQ or project BOM so the supplied terminal matches the optical interface, loaded components and packaging plan.
| Ordering Field | Published Choice | Information to State on the RFQ |
|---|---|---|
| Model | FTB-104A | Model name and approved drawing or sample reference. |
| Active fiber count | Up to 4 fibers | Number of active fibers required at each terminal. |
| Populated adapter quantity | Up to 4 SC-format positions | Quantity of adapters to be factory fitted. |
| Optical interface | SC/APC published configuration; SC options for SM, MM or APC/SM use | Connector format, polish and fiber system required by the link. |
| Pigtail set | 0.9 mm compatible | Quantity, fiber type, connector polish and length. |
| Supply format | Terminal box; set may include pigtails and related adapters | Loaded, partially loaded or housing-only BOM. |
| Mounting plan | Wall mounted | Wall substrate, installation location and required mounting hardware. |
| Identification | Project-defined | Port labels, carton marks, product label and artwork file. |
| Packing | 50 pcs per 750 × 340 × 295 mm outer carton | Standard carton or approved project packing and labeling. |
| Acceptance documents | Project-defined | Approved BOM, drawing, sample reference and required optical test record for loaded components. |
Recommended RFQ line
FTB-104A FTTH optical terminal box, 4-fiber capacity, [quantity] populated SC [polish] adapters, [fiber type] 0.9 mm pigtails, wall-mount configuration, project labels, approved packing and drawing reference.
OEM and project support
Project Configuration for a Custom FTTH Optical Terminal Box Order
For repeat orders, the most useful customization work is configuration control: one approved housing combined with a documented adapter, pigtail, label and packing BOM.
Connection Schedule Review
Align the four adapter positions with the active fiber count, SC interface, pigtail construction and downstream patch cords before the sample is released.
Loaded Assembly Definition
Define whether each unit is housing-only, partially loaded or supplied as a set with 0.9 mm pigtails and related adapters.
Drawing and Sample Approval
Use one approved drawing or physical sample to control dimensions, port population, label position and the component list used in batch production.
Label and Carton Control
Provide artwork, port identification, carton marks and any distributor-specific packing instructions with the purchase order.
Optical Component Records
For loaded assemblies, state the optical test record required for the fitted pigtails and adapters according to the project acceptance plan.
Repeat-Order BOM
Lock the approved housing, adapter, pigtail, label and packing fields into a revision-controlled project BOM for subsequent shipments.
Company background
Why Glory Optical for FTB-104A Project Supply
Glory Optical Communication is a Ningbo-based passive fiber optic infrastructure manufacturer founded in 2008. Its 20,000 m² manufacturing facility brings R&D, molding, assembly and testing together for FTTH, ODN, OSP and data center fiber products.
Enclosure and Assembly Workflow
For the FTB-104A, the relevant capabilities include plastic enclosure molding, terminal assembly, adapter and pigtail integration, label control and packing. Keeping these steps in one manufacturing workflow supports a consistent housing and loaded-component BOM across repeat orders.
OEM/ODM Configuration Support
Glory Optical publishes OEM/ODM support for project buyers, including product design, mold development, custom labeling and packaging. For this terminal, the practical configuration path is to confirm the four-port layout, optical interface, 0.9 mm pigtail set, supplied accessories and packing before batch production.
From sample verification to project configuration
Confirm the physical interface and cable code before bulk production, then lock the approved configuration into drawings and order codes.
3-Year Service Policy
Defined return, replacement and repair support is available according to the applicable warranty terms and confirmed order documentation.
OEM/ODM Configuration
Port count, cable length, splitter structure, mounting accessories, labeling and packaging can be configured for the project.
Sample & Drawing Approval
Sample evaluation and approved drawings help confirm interface fit, sealing and cable compatibility before volume deployment
Our Quality Promise
Comprehensive 3-Year Warranty
We confidently back all our products with a 3-year warranty. Our specific service policy is: within one year for quality issues, we take full responsibility for returns; within two years, for replacements; and within three years, for repairs.
Clear & Competitive MOQ
We welcome both trial and bulk orders. Our standard Minimum Order Quantity (MOQ) is 50 units. We also offer free samples for testing to help you evaluate our quality with confidence.
Fast & Reliable Logistics
We guarantee delivery within 10 days for standard items. Our logistics advantage includes cost-effective door-to-door service to simplify shipping for you.
Our Foundation
Backed by 18 years of experience since 2008, we control quality from our own factory, accept OEM/ODM requests, and maintain ready stock for wholesale. We focus on delivering the optimal balance of price and quality directly to end customers worldwide.
Your trust is our priority. Partner with us for dependable fiber optic solutions supported by clear promises.
Hot Tags: ftth optical terminal box, China ftth optical terminal box manufacturers, suppliers, factory, Fiber Optic Box Wall, Fiber Optic Cable Junction Box, fiber outlet box, fiber splicing box, fiber to the box, Outdoor Fiber Box
