1x2 Plc Splitter

The 1x2 Fiber Optic Splitter has carrier-class - low insertion loss, good stability and good channel-to-channel uniformity, low polarization dependent loss. It is compact design, lightweight, only occupy a little space. The fiber optic splitter is convenient, fast and practical, can be installed directly in a variety of fiber optical exchange box, and can distribute the signal evenly to each customer with strong transmission stability. With good directivity, good environmental stability, not sensitive to wavelength loss.

Core Application Scenarios
This 1x2 Optical Splitter is a basic and useful part for many networks. It is mainly used for checking signals, protecting lines, and simple signal splitting. You often find it in Fiber-to-the-Home or Fiber-to-the-Building networks. Here, it can take a small sample of the light for testing without stopping service. Or, it can split one signal to feed two separate lines. It is also common in cable TV systems to send a broadcast signal to two outputs. You can use it in office network backbones too, to divide optical power. Because it is small, it fits easily into patch panels, wall boxes, and even portable test gear.

Professional Installation Guidelines
You must install it correctly to keep signal loss low. Before you start, clean all connectors. Use proper fiber cleaning tools on the splitter's SC ports and on the patch cables. Handle the splitter by its box. Do not pull on the fiber tails attached to it. When placing it inside a cabinet, leave some extra cable. Do not bend the fibers too tightly; keep bends larger than 30mm. When connecting, push the SC connectors in firmly until they click and lock. Some jobs need a specific split ratio, like 10/90 for monitoring. Make sure you use the correct model for your needs.

Maintenance & Service Life Assurance
This splitter needs very little care because it has no active parts. The main job is to keep the connections clean. Check the ports now and then and clean them. You can also use a power meter to check the signal loss sometimes. If the loss gets much worse, the connectors might be dirty. The splitter works well in very hot or cold places, from -40°C to +85°C. To make it last long, keep it safe from bumps, dust, and water. Do not put stress on the fibers. Clean connections and gentle handling will extend its life.

Comprehensive Warranty & Customization
We promise our 1x2 Splitters will work well and are reliable. They are made to meet common industry standards. We can customize them for your job. You can choose different split ratios. The standard is 50/50, but we can make others from 1/99 to 50/50. You can pick connector types (SC/UPC is standard, but LC, FC, or ST are possible). You can choose the fiber type and jacket, like bare fiber, loose tube, or thicker cable. We can also make the fiber tails any length you need. We do both standard and special orders for OEM customers.

Technical Expertise at Your Service
Our technical team can help you pick the right splitter. We help with optical power planning. We advise on the best split ratio for checking signals or for splitting them. We also help figure out how to fit the splitter into your existing boxes and racks. If you want, we can send you a sample to try in your own system first.

Supply Chain & Logistics
We have a good supply system to get you splitters quickly. We keep standard ones ready to ship. We also make custom ones. We offer different packaging and shipping choices, from single units to large orders. For big purchases, we have good prices. We work hard to deliver on time for your project schedule.