Product Positioning
This E2000 UPC adapter is a passive fiber connection component. It does not convert signal type, connector type or polish type; its job is to hold two compatible E2000 UPC ferrules in accurate alignment so optical power can pass through the connection with low insertion loss.
Compared with a general category page that only lists basic parameters, this product page is organized for project buyers who need to confirm adapter type, panel mounting, sleeve material, temperature range and batch inspection points before placing an order.
For E2000 UPC Interfaces
The listed configuration is intended for E2000 UPC connector mating. Use the same connector format and polish type on both sides of the adapter.
Panel-Mounted Use
The flange design helps the adapter sit securely in patch panels, ODF modules, equipment trays and optical distribution cabinets.
Low-Loss Coupling Point
With the listed ≤0.2 dB insertion loss, the adapter is suitable for links where every connector pair must be controlled in the loss budget.
Technical Specifications
| Product Name | UPC Adapter |
|---|---|
| Model | E2000 UPC Adapter |
| Adapter Type | E2000 |
| Body Style | Simplex |
| Connector Polish Type | UPC |
| Connector Fiber Mode | Singlemode |
| Insertion Loss | ≤0.2 dB |
| Durability | >1000 times |
| Mounting Type | With flange |
| Alignment Sleeve Material | Ceramic |
| Color | Blue |
| RoHS Compliancy Status | Compliant |
| Working Temperature | -40~85°C |
| Storage Temperature | -40~85°C |
Product Details and Structure
The adapter body provides a stable mechanical interface for E2000 UPC connectors. The ceramic sleeve is used to align the ferrules, while the flange allows the adapter to be fixed into a panel cutout instead of remaining loose inside a cabinet.
- Blue housing for UPC identification in cabinet wiring
- Simplex body for one optical channel per adapter position
- Ceramic alignment sleeve for precise ferrule centering
- Flange structure for patch panel or ODF installation
- Designed for repeated mating in maintenance environments
Dimension Reference
The drawing helps engineers check whether the adapter matches the planned panel opening, front access space and patch cord routing clearance. For batch procurement, confirm the panel cutout and mounting direction together with the adapter drawing.
Because adapters are often ordered together with patch panels, ODF trays or pre-terminated assemblies, dimension confirmation can prevent installation delays caused by mismatched holes, wrong flange style or insufficient connector clearance.
Installation Layer: How to Use This Adapter Correctly
The adapter is a small component, but poor installation can still create unstable loss, repeat service visits or unexpected port troubleshooting. The following points are useful for installers and project inspectors.
Match the Interface First
Confirm that the field connector is E2000 UPC. Do not use this adapter as a substitute for SC, LC, FC or APC connection points.
Fix the Flange Securely
Install the adapter into the correct panel opening and fasten it so connector insertion force is not transferred to loose wiring behind the panel.
Keep the Sleeve Clean
Dust inside the adapter sleeve can increase link loss. Keep protective caps on unused ports and clean connectors before mating.
Respect Key Orientation
Insert the connector in the correct direction. Forcing the connector may damage the adapter body, ferrule end-face or panel mounting area.
Control Bend Stress
Leave enough patch cord slack near the adapter. Avoid side-loading the connector after it is plugged into the panel.
Record the Port Map
For ODF and cabinet projects, label adapter positions clearly so future maintenance teams can trace ports without repeated unplugging.
Where This UPC Adapter Fits in a Network
| Application Layer | Typical Use | Why E2000 UPC Adapter Matters |
|---|---|---|
| ODF and Fiber Distribution Frame | Cross-connection between incoming cable, pigtail and equipment jumper | Provides a fixed UPC port for organized patching and easier maintenance |
| Telecom Equipment Cabinet | Connector interface between active equipment and passive cabling | Flange mounting helps stabilize the connection point inside the cabinet |
| LAN / Campus Singlemode Backbone | Patch panel connection in building backbone or equipment room | Low insertion loss supports stable optical margin across multiple connection points |
| 5G Fronthaul and Transport Access | Fiber handoff between transport equipment, patch panel and route cable | Repeatable mating and clean port management reduce maintenance uncertainty |
| Data Center Interconnection | Singlemode patching at equipment-side or distribution-side locations | Clear UPC port identification helps operators avoid polish-type mistakes |
UPC Adapter Selection Notes
Before confirming the part number, check the required connector family, polish type, color, sleeve material and mounting style. These details determine whether the adapter will fit the panel and whether the patch cord can be connected correctly on site.
UPC vs APC
UPC is normally identified with a blue housing in many fiber patching environments. APC is commonly green and is selected when angled-polish reflection performance is required. Do not mix UPC and APC connectors in the same adapter position.
Simplex vs Duplex
This listed item is simplex, meaning one fiber channel per adapter. For paired transmit and receive channels, confirm whether the project needs two simplex adapters or a duplex-style adapter arrangement
Batch Inspection Checklist
For distributor orders, OEM projects or panel assembly work, the adapter should be checked as part of the incoming material inspection process.
| Checkpoint | What to Confirm |
|---|---|
| Connector Interface | E2000 adapter type and UPC polish requirement |
| Body Style | Simplex housing and blue color according to the project BOM |
| Mounting Form | With flange; verify panel compatibility before assembly |
| Sleeve Material | Ceramic alignment sleeve for stable ferrule alignment |
| Optical Performance | Insertion loss requirement ≤0.2 dB; confirm test requirement for the order |
| Mechanical Durability | >1000 mating cycles as listed on the product page |
| Compliance | RoHS compliant status and any customer-specific document request |
| Packing and Labeling | Quantity per bag/carton, item label, project code and mixed-model separation |
RFQ Information Needed
To quote this E2000 UPC adapter accurately, send the adapter model, quantity and project configuration details together. This is especially important when the adapter will be installed into ODF modules, pre-loaded panels or customer-specific cabinet assemblies.
| RFQ Item | Example / Notes |
|---|---|
| Required Model | E2000 UPC Adapter |
| Quantity | Sample order, panel assembly batch or bulk procurement |
| Mounting | With flange |
| Polish and Fiber Mode | UPC, singlemode |
| Application | ODF, patch panel, equipment cabinet, data center or telecom project |
| Document Requirement | Datasheet, RoHS declaration, sample approval or inspection report if needed |
| Packing Requirement | Standard packing, OEM label or project-specific carton label |
| Destination Country | Used for freight quotation and delivery planning |
FAQ
Q: What connector type does this UPC Adapter support?
A: The listed model is an E2000 UPC adapter. It should be matched with compatible E2000 UPC connectors.
Q: Is this a simplex or duplex adapter?
A: This product page lists the body style as simplex, so it supports one fiber channel per adapter position.
Q: What is the listed insertion loss?
A: The listed insertion loss is ≤0.2 dB, making it suitable for low-loss patching points in singlemode optical links.
Q: Can this adapter be installed in an ODF or patch panel?
A: Yes. The page lists the mounting type as with flange, which is suitable for panel-mounted connection points when the cutout matches the adapter size.
Q: What sleeve material is used?
A: The alignment sleeve material is ceramic, which is commonly used to support accurate ferrule alignment in fiber adapters.
Q: What should be checked before bulk ordering?
A: Confirm E2000 interface, UPC polish, singlemode requirement, simplex body, flange mounting, blue housing, insertion loss requirement, packaging and any RoHS or inspection document requirements.
Our Quality Promise
Comprehensive 3-Year Warranty
We confidently back all our products with a 3-year warranty. Our specific service policy is: within one year for quality issues, we take full responsibility for returns; within two years, for replacements; and within three years, for repairs.
Clear & Competitive MOQ
We welcome both trial and bulk orders. Our standard Minimum Order Quantity (MOQ) is 50 units. We also offer free samples for testing to help you evaluate our quality with confidence.
Fast & Reliable Logistics
We guarantee delivery within 10 days for standard items. Our logistics advantage includes cost-effective door-to-door service to simplify shipping for you.
Our Foundation
Backed by 18 years of experience since 2008, we control quality from our own factory, accept OEM/ODM requests, and maintain ready stock for wholesale. We focus on delivering the optimal balance of price and quality directly to end customers worldwide.
Your trust is our priority. Partner with us for dependable fiber optic solutions supported by clear promises.
Hot Tags: upc adapter, China upc adapter manufacturers, suppliers, factory, a fiber optic cable, fiber optic installation, fiber optic jumpers, fiber optic port, patch panel fiber optic, plc fiber
