What Makes This Version Different
No-Flange Body
The adapter is selected for panels or boxes where side flanges and screws are not required. This helps keep the front face compact.
Transparent Housing
The clear body makes the adapter easy to distinguish from the common blue, green or beige adapter colors used in mixed patching areas.
SC Simplex Channel
One adapter position supports one SC-to-SC fiber connection, suitable for subscriber lines, test ports or spare panel interfaces.
Ceramic Sleeve
The ceramic sleeve is used to keep the connector ferrules aligned during repeated insertions and removals.
Confirmed Product Data
| Product Name | SC Adapter Without Flange |
|---|---|
| Model / Description | SC Adapter Transparent Without Flange |
| Adapter Type | SC |
| Body Style | Simplex |
| Connector Polish Type | PC |
| Fiber Mode | Singlemode |
| Insertion Loss | ≤0.2 dB |
| Durability | >1000 times |
| Mounting Type | Without flange |
| Alignment Sleeve Material | Ceramic |
| Color | Transparent |
| RoHS Status | Compliant |
Panel Fit and Installation Logic
A no-flange SC adapter should not be treated the same way as a screw-fixed adapter. The most important confirmation is whether the adapter body locks correctly into the existing cutout or adapter holder. For replacement projects, check the original panel opening, latch position and front clearance before ordering a bulk batch.
Use It Where the Panel Provides the Retention
Without-flange adapters rely on the panel slot, clip or holder for mechanical retention. They are suitable when the enclosure design already controls adapter position and does not need extra screws on the adapter face.
- Compact ODF trays and patch panels
- Fiber terminal boxes with molded adapter slots
- Subscriber access panels and test positions
- Internal modules where screw flanges would block the layout
Specification Range for SC Adapter Projects
The product family specification allows the SC adapter line to support different polish and fiber-mode combinations. For this SKU, use the transparent singlemode PC without-flange configuration unless the project drawing calls for another version.
| Parameter | SC Adapter Family Reference | What to Confirm for This SKU |
|---|---|---|
| Polish Options | PC / UPC / APC depending on ordered model | This page lists PC. Keep connector polish matched across both sides. |
| Fiber Mode | Singlemode and multimode versions may be available | This page lists singlemode. |
| Insertion Loss | ≤0.2 dB for listed singlemode entries; ≤0.3 dB shown for multimode reference | Use ≤0.2 dB as the purchasing checkpoint for this singlemode SKU. |
| Repeatability / Alternating Loss | ≤0.2 dB | Check random samples after repeated mating if the adapter is used in test panels. |
| Durability | 1000 insertion cycles with change less than 0.2 dB | Useful for maintenance ports and frequently accessed cabinets. |
| Working Temperature | -40°C to +85°C | Suitable for equipment rooms, outdoor boxes and cabinet environments when the enclosure is properly selected. |
| Storage Temperature | -40°C to +85°C | Keep adapters clean and capped during storage before assembly. |
Application Layer
ODF and Cross-Connection Frames
Used as an SC port in distribution frames where a clean, simple one-fiber interface is needed for jumper management or subscriber routing.
FTTH Terminal Boxes
Fits indoor or outdoor terminal boxes when the molded slot is already made for no-flange SC adapters and the project uses PC singlemode patching.
Equipment-Side Patch Panels
Can be used in access equipment cabinets, passive panels and test benches where compact adapter mounting is more important than screw mounting.
Procurement Checklist for Bulk Orders
For a small component like an SC adapter, many quality issues come from unclear configuration rather than from the adapter name itself. Use the checklist below when sending an inquiry or confirming a sample.
| RFQ Item | Recommended Confirmation |
|---|---|
| Adapter Format | SC simplex, not duplex and not LC/FC/ST. |
| Mounting | Without flange. Share panel photos or cutout drawings for fit confirmation. |
| Polish / Mode | PC singlemode as listed on this page. Confirm if UPC or APC is required instead. |
| Sleeve | Ceramic sleeve for stable ferrule alignment. |
| Color | Transparent housing. Confirm if your project uses a strict color-coding rule. |
| Testing Requirement | Insertion loss ≤0.2 dB; random batch inspection can be requested for project orders. |
| Packaging | Individual or bulk packaging depending on assembly-line use and warehouse handling. |
Handling and Acceptance Notes
Before Installation
Check the adapter body for cracks, verify the sleeve is clean, and keep dust caps installed until the connector is ready to mate.
During Assembly
Do not force the adapter into an incompatible panel slot. A loose fit may create unstable retention; an overly tight fit may damage the transparent housing.
After Patching
Confirm the SC connector latch is fully seated and the patch cord is not pulling against the adapter at a sharp angle.
For Maintenance
If the port is opened repeatedly, inspect for dust and sleeve contamination before blaming the fiber cable or transceiver.
FAQ
Is this adapter screw-mounted?
No. The listed mounting type is without flange, so it should be used with a panel or holder designed for no-flange adapter retention.
What connector should be used with it?
Use compatible SC connectors. This product page lists a simplex SC adapter for singlemode PC connector mating.
Why is the housing transparent?
The transparent body helps distinguish this model from colored SC adapters and can be useful in custom panel assemblies where the adapter color is part of the BOM confirmation.
Can it replace a flanged SC adapter?
Only if the panel or adapter holder is designed for no-flange mounting. A screw-fixed panel may not hold this version correctly without changing the hardware.
What should be checked before mass production?
Confirm SC simplex format, PC singlemode polish, no-flange mounting, transparent color, ceramic sleeve and insertion-loss requirement.
Our Quality Promise
Comprehensive 3-Year Warranty
We confidently back all our products with a 3-year warranty. Our specific service policy is: within one year for quality issues, we take full responsibility for returns; within two years, for replacements; and within three years, for repairs.
Clear & Competitive MOQ
We welcome both trial and bulk orders. Our standard Minimum Order Quantity (MOQ) is 50 units. We also offer free samples for testing to help you evaluate our quality with confidence.
Fast & Reliable Logistics
We guarantee delivery within 10 days for standard items. Our logistics advantage includes cost-effective door-to-door service to simplify shipping for you.
Our Foundation
Backed by 18 years of experience since 2008, we control quality from our own factory, accept OEM/ODM requests, and maintain ready stock for wholesale. We focus on delivering the optimal balance of price and quality directly to end customers worldwide.
Your trust is our priority. Partner with us for dependable fiber optic solutions supported by clear promises.
Hot Tags: sc adapter without flange, China sc adapter without flange manufacturers, suppliers, factory, a fiber optic cable, fiber optic installation, fiber optic jumpers, fiber optic port, lc to sc fiber cable, patch panel fiber optic
